Fuji Electric · Industrial HMI

Fuji Electric V710C: Status, Repair & Replacement

Independent research desk dossier

Current researched status

Fuji Electric's V7 Hardware Specifications manual identifies V710C as a V710-series, 10-inch-class TFT color HMI with AC power supply. A model-specific V710C sale-end or repair-end date is unknown from the collected OEM pages: Fuji's discontinued-model page exposes V810C but not a V710C row, so V810C dates must not be assigned to V710C. Repair and migration require an exact-unit, project, and installation assessment; the cited records do not establish drop-in compatibility, stock, or guaranteed repair.

Published findings

  • IDENTITY: Fuji Electric's V7 Hardware Specifications manual identifies V710C as a V710-series, 10-inch-class TFT color HMI with AC power supply

    • Fuji Electric V7 Hardware Specifications · OEM_DOCUMENT

      V710 series 10-inch | V710C | TFT color, 640 × 480 dots, standard, AC power supply.

      Source location: Printed section 1-3, model specification table

      Evidence captured: 2026-09-13

  • PHYSICAL_DISPLAY: The V7 manual's V710C display column specifies a 10.4-inch display, 128 colors plus 16-color blinks, 640 × 480 dots, 220 cd/m² brightness, and 350:1 contrast

    • Fuji Electric V7 Hardware Specifications · OEM_DOCUMENT

      V710C display column: 10.4-inch, 128 colors plus 16-color blinks, 640 × 480 dots, 220 cd/m², contrast 350:1.

      Source location: Display Specifications, printed section 2-2

      Evidence captured: 2026-09-13

  • PHYSICAL_INSTALLATION: The reviewed V7 manual documents V710-series panel installation and environmental specifications, but the collected V710C excerpt does not establish a model-specific enclosure dimension or cut-out; obtain the unit drawing before panel work

    • Fuji Electric V7 Hardware Specifications · OEM_DOCUMENT

      V7 manual provides dimensions and panel cut-out sections, while the collected V710C excerpt does not expose a separate model-specific dimension row.

      Source location: Dimensions and Panel Cut-out, printed section 2

      Evidence captured: 2026-09-13

  • ELECTRICAL_ENVIRONMENT: The V7 manual distinguishes V710C as the AC-power variant and documents 100–240 VAC ±10% for the V710 AC supply family, 0–50°C operation, −10–60°C storage, and humidity up to 85% RH without condensation

    • Fuji Electric V7 Hardware Specifications · OEM_DOCUMENT

      V710 AC power family: 100–240 VAC ±10%; ambient temperature 0°C to +50°C; storage −10°C to +60°C; ambient humidity 85% RH or less without dew condensation.

      Source location: General Specifications, printed section 2-1

      Evidence captured: 2026-09-13

  • COMMUNICATIONS_INTERFACES: For V710C, the V7 manual documents the V7 system's D-Sub/MJ serial connections, CF card, and optional Ethernet/communication-unit architecture; the installed V710C option set and PLC protocol must be verified rather than inferred from the family diagram

    • Fuji Electric V7 Hardware Specifications · OEM_DOCUMENT

      V7 system composition shows RS-232C/RS-422, CF card, Ethernet and optional communication units; serial connector and modular-jack sections describe the connection architecture.

      Source location: System Composition and sections 2-12, 2-18, 5-9

      Evidence captured: 2026-09-13

  • SOFTWARE_PROJECT: For V710C, Fuji/Hakko documents V7 screen transfer/configuration with V-SFT-5 and CF/Ethernet transfer routes where the documented option is present; project conversion to V9 uses V-SFT-6 and may not remain 100% compatible

    • Fuji Electric MONITOUCH V9 Replacement Guidance [V7 series] · OEM_DOCUMENT

      V7 screen programs can be converted with V-SFT-6, but the program may not remain 100% compatible and functions may be limited.

      Source location: Screen Program Conversion, V7/V9 section

      Evidence captured: 2026-09-13

  • LIFECYCLE: A model-specific V710C sale-end or repair-end date is unknown from the collected OEM pages: Fuji's discontinued-model page exposes V810C but not a V710C row, so V810C dates must not be assigned to V710C

    • Fuji Electric MONITOUCH Discontinued Models · OEM_PRODUCT_PAGE

      The V Series table includes V810C but no V710C row; no V710C date is exposed in this collected page.

      Source location: V Series discontinued-model table

      Evidence captured: 2026-09-13

  • MIGRATION_REFERENCE: Fuji/Hakko's V9 Replacement Guidance [V7 series] explicitly lists V9100iC and V9100iCD as recommended replacement models for the V710C series; the same guidance warns that conversion may limit functions and does not establish electrical, mechanical, protocol, or application compatibility

    • Fuji Electric MONITOUCH V9 Replacement Guidance [V7 series] · OEM_DOCUMENT

      V710C Series: Recommended Replacement Model — V9100iC V9100iCD.

      Source location: V710C Series section

      Evidence captured: 2026-09-13

Identification and compatibility checks

Identity

Exact identifier: V710C. Manufacturer: Fuji Electric.

Lifecycle

Fuji Electric's V7 Hardware Specifications manual identifies V710C as a V710-series, 10-inch-class TFT color HMI with AC power supply. A model-specific V710C sale-end or repair-end date is unknown from the collected OEM pages: Fuji's discontinued-model page exposes V810C but not a V710C row, so V810C dates must not be assigned to V710C. Repair and migration require an exact-unit, project, and installation assessment; the cited records do not establish drop-in compatibility, stock, or guaranteed repair.

V710C: The V7 manual's V710C display column specifies a 10.4-inch display, 128 colors plus 16-color blinks, 640 × 480 dots, 220 cd/m² brightness, and 350:1 contrast. The reviewed V7 manual documents V710-series panel installation and environmental specifications, but the collected V710C excerpt does not establish a model-specific enclosure dimension or cut-out; obtain the unit drawing before panel work. Verify the installed nameplate, revision, power, environment, controller, protocols, cables, project backup, and panel opening before selecting a route.

For V710C, capture the complete nameplate and hardware/firmware revision, then compare the v7 manual distinguishes v710c as the ac-power variant and documents 100–240 vac ±10% for the v710 ac supply family, 0–50°c operation, −10–60°c storage, and humidity up to 85% rh without condensation for v710c, the v7 manual documents the v7 system's d-sub/mj serial connections, cf card, and optional ethernet/communication-unit architecture; the installed v710c option set and plc protocol must be verified rather than inferred from the family diagram and for v710c, fuji/hakko documents v7 screen transfer/configuration with v-sft-5 and cf/ethernet transfer routes where the documented option is present; project conversion to v9 uses v-sft-6 and may not remain 100% compatible against the installed project. Do not treat the evidence or any migration reference as interchangeability approval.

Repair, replacement, and migration decision guide

Repair the installed unit
Consider assessment when preserving the existing project, wiring, panel, and machine behavior is the priority. Repairability, scope, and turnaround are not confirmed until the exact unit is evaluated.
Source the exact reference
Use the complete V710C nameplate and revision. Current stock, condition, seller participation, and suitability are not established by this dossier.
Engineer a migration
Verify project conversion, communications, power, panel cutout, accessories, commissioning, and safety before treating any newer platform as a replacement.

Information to collect before requesting help

  • Clear photographs of the complete nameplate, front, rear, connectors, and installed panel.
  • Hardware and firmware revision, supply rating, controller, network, and communication details.
  • Editable project files, runtime backups, software version, and the machine's acceptable downtime.
  • The preferred path: repair, exact-reference sourcing, or a reviewed migration.

What to do next

Preserve the project and nameplate evidence, then request inquiry-specific review for repair, exact-reference sourcing, or an engineered migration.

Review the project-backup guide before disturbing the installed unit.

Frequently asked questions

Is the Fuji Electric V710C discontinued?

Fuji Electric's V7 Hardware Specifications manual identifies V710C as a V710-series, 10-inch-class TFT color HMI with AC power supply. A model-specific V710C sale-end or repair-end date is unknown from the collected OEM pages: Fuji's discontinued-model page exposes V810C but not a V710C row, so V810C dates must not be assigned to V710C. Repair and migration require an exact-unit, project, and installation assessment; the cited records do not establish drop-in compatibility, stock, or guaranteed repair.

What should I verify before repairing or replacing V710C?

V710C: The V7 manual's V710C display column specifies a 10.4-inch display, 128 colors plus 16-color blinks, 640 × 480 dots, 220 cd/m² brightness, and 350:1 contrast. The reviewed V7 manual documents V710-series panel installation and environmental specifications, but the collected V710C excerpt does not establish a model-specific enclosure dimension or cut-out; obtain the unit drawing before panel work. Verify the installed nameplate, revision, power, environment, controller, protocols, cables, project backup, and panel opening before selecting a route.

Is a named V710C replacement guaranteed to be plug-and-play?

For V710C, capture the complete nameplate and hardware/firmware revision, then compare the v7 manual distinguishes v710c as the ac-power variant and documents 100–240 vac ±10% for the v710 ac supply family, 0–50°c operation, −10–60°c storage, and humidity up to 85% rh without condensation for v710c, the v7 manual documents the v7 system's d-sub/mj serial connections, cf card, and optional ethernet/communication-unit architecture; the installed v710c option set and plc protocol must be verified rather than inferred from the family diagram and for v710c, fuji/hakko documents v7 screen transfer/configuration with v-sft-5 and cf/ethernet transfer routes where the documented option is present; project conversion to v9 uses v-sft-6 and may not remain 100% compatible against the installed project. Do not treat the evidence or any migration reference as interchangeability approval.

What solution paths are documented for V710C?

The researched paths are engineered migration assessment, v710c engineered migration assessment, exact-unit repair assessment, v710c exact-unit repair assessment. Current terms and suitability must be confirmed for the specific unit and machine context.

What if my identifier is slightly different from V710C?

Search the complete nameplate value or submit a request with a clear label photo so the revision can be researched without guessing.

Evidence and sources

Request researched help

Submit a matching request with the exact label, revision, machine context, and preferred solution path.

We do not make automated stock, price, turnaround, compatibility, provider-participation, or fulfillment claims. Every path requires inquiry-specific review.

Research desk method

NoLongerAvailable.net evaluates published evidence and secondary market signals to structure practical decision pathways. We do not hold stock or make automated fulfillment or engineering claims.