Schneider Electric · Industrial HMI

Schneider Electric XBTGT5340: Status, Repair & Replacement

Independent research desk dossier

Current researched status

Schneider Electric identifies XBTGT5340 as an advanced touchscreen panel with a 640 × 480 VGA, 10.4-inch display and 24 V supply. Schneider's preserved exact-ID rendering records XBTGT5340 discontinued on December 31, 2015; an exact Schneider end-of-service date is not established in the collected record. Repair and migration require an exact-unit, project, and installation assessment; the cited records do not establish drop-in compatibility, stock, or guaranteed repair.

Published findings

  • PHYSICAL_DISPLAY: The Schneider-authored hardware guide groups XBTGT5340 with XBTGT5330 as TFT color LCD, 640 × 480 pixels, 65,536 colors, active display area 211.2 × 158.4 mm, with CFL backlight service life 50,000 hours at 25°C to half brightness

    • Schneider-authored Magelis XBT GT Hardware Guide (MRO mirror) · OEM_AUTHORED_DOCUMENT_MIRROR

      XBT GT 5330/5340: TFT color LCD, 640 × 480 pixels, 65,536 colors, active display area 211.2 × 158.4 mm; CFL backlight 50,000 h at 25°C to half brightness.

      Source location: Hardware specification table, printed section 13

      Evidence captured: 2026-09-13

  • PHYSICAL_INSTALLATION: The Schneider-authored guide's shared XBTGT5330/XBTGT5340 table lists a 259 × 201 mm flush-mount cut-out and 1.6–10 mm panel thickness; this shared row does not establish exact-unit interchangeability

    • Schneider-authored Magelis XBT GT Hardware Guide (MRO mirror) · OEM_AUTHORED_DOCUMENT_MIRROR

      XBTGT5330/XBTGT5340 cut-out: 259 × 201 mm; panel thickness 1.6–10 mm.

      Source location: Flush-mount cut-out table

      Evidence captured: 2026-09-13

  • ELECTRICAL_ENVIRONMENT: The Schneider-authored XBTGT5340 product data lists 24 V DC rated supply, 19.2–28.8 V limits, and 30 W power consumption

    • Schneider Electric XBTGT5340 product data (RS mirror) · OEM_AUTHORED_DOCUMENT_MIRROR

      XBTGT5340 electrical data lists 24 V DC rated supply, 19.2–28.8 V limits, and 30 W power consumption.

      Source location: Complementary electrical data

      Evidence captured: 2026-09-13

  • COMMUNICATIONS_INTERFACES: The XBTGT5340 product data lists USB Type A, Ethernet TCP/IP, COM1 RS-232C/RS-422/RS-485, COM2 RS-485, a CompactFlash slot, and an optional DeviceNet or Profibus DP fieldbus card

    • Schneider Electric XBTGT5340 product data (RS mirror) · OEM_AUTHORED_DOCUMENT_MIRROR

      XBTGT5340 connection data lists USB Type A, Ethernet TCP/IP, COM1 RS232C/RS422/RS485, COM2 RS485, CompactFlash, and DeviceNet/Profibus DP fieldbus-card provision.

      Source location: Integrated connection and slot tables

      Evidence captured: 2026-09-13

  • SOFTWARE_PROJECT: The XBTGT5340 product data identifies Vijeo Designer configuration software, Magelis operating system, 32 MB application flash, and 512 kB battery-backed SRAM; project and protocol support remain installation-specific

    • Schneider Electric XBTGT5340 product data (RS mirror) · OEM_AUTHORED_DOCUMENT_MIRROR

      XBTGT5340 product data identifies Magelis, Vijeo Designer, 32 MB application flash, and 512 kB battery-backed SRAM.

      Source location: Main product-data table

      Evidence captured: 2026-09-13

  • LIFECYCLE: Schneider's preserved exact-ID rendering records XBTGT5340 discontinued on December 31, 2015; an exact Schneider end-of-service date is not established in the collected record

    • Schneider Electric XBTGT5340 product record (preserved OEM rendering) · OEM_PRESERVED_RENDERING

      XBTGT5340: Discontinued on Dec 31, 2015; availability schema is Discontinued; no populated exact end-of-service date was exposed.

      Source location: Exact model commercial-status table

      Evidence captured: 2026-09-13

  • MIGRATION_REFERENCE: The reviewed exact XBTGT5340 record and Schneider-authored technical data do not establish a model-specific replacement or compatibility conclusion; any candidate must be engineered against the exact project and panel

    • Schneider Electric XBTGT5340 product page · OEM_PRODUCT_PAGE

      The reviewed exact product record identifies XBTGT5340 but does not expose a model-specific replacement conclusion.

      Source location: Product record and replacement section review

      Evidence captured: 2026-09-13

  • IDENTITY: Schneider Electric identifies XBTGT5340 as an advanced touchscreen panel with a 640 × 480 VGA, 10.4-inch display and 24 V supply

    • Schneider Electric XBTGT5340 product page · OEM_PRODUCT_PAGE

      Advanced touchscreen panel - 640 x 480 pixels VGA - 10.4 inch - 24 V.

      Source location: Exact product title

      Evidence captured: 2026-09-13

Identification and compatibility checks

Identity

Exact identifier: XBTGT5340. Manufacturer: Schneider Electric.

Lifecycle

Schneider Electric identifies XBTGT5340 as an advanced touchscreen panel with a 640 × 480 VGA, 10.4-inch display and 24 V supply. Schneider's preserved exact-ID rendering records XBTGT5340 discontinued on December 31, 2015; an exact Schneider end-of-service date is not established in the collected record. Repair and migration require an exact-unit, project, and installation assessment; the cited records do not establish drop-in compatibility, stock, or guaranteed repair.

XBTGT5340: The Schneider-authored hardware guide groups XBTGT5340 with XBTGT5330 as TFT color LCD, 640 × 480 pixels, 65,536 colors, active display area 211.2 × 158.4 mm, with CFL backlight service life 50,000 hours at 25°C to half brightness. The Schneider-authored guide's shared XBTGT5330/XBTGT5340 table lists a 259 × 201 mm flush-mount cut-out and 1.6–10 mm panel thickness; this shared row does not establish exact-unit interchangeability. Verify the installed nameplate, revision, power, environment, controller, protocols, cables, project backup, and panel opening before selecting a route.

For XBTGT5340, capture the complete nameplate and hardware/firmware revision, then compare the schneider-authored xbtgt5340 product data lists 24 v dc rated supply, 19.2–28.8 v limits, and 30 w power consumption the xbtgt5340 product data lists usb type a, ethernet tcp/ip, com1 rs-232c/rs-422/rs-485, com2 rs-485, a compactflash slot, and an optional devicenet or profibus dp fieldbus card and the xbtgt5340 product data identifies vijeo designer configuration software, magelis operating system, 32 mb application flash, and 512 kb battery-backed sram; project and protocol support remain installation-specific against the installed project. Do not treat the evidence or any migration reference as interchangeability approval.

Repair, replacement, and migration decision guide

Repair the installed unit
Consider assessment when preserving the existing project, wiring, panel, and machine behavior is the priority. Repairability, scope, and turnaround are not confirmed until the exact unit is evaluated.
Source the exact reference
Use the complete XBTGT5340 nameplate and revision. Current stock, condition, seller participation, and suitability are not established by this dossier.
Engineer a migration
Verify project conversion, communications, power, panel cutout, accessories, commissioning, and safety before treating any newer platform as a replacement.

Information to collect before requesting help

  • Clear photographs of the complete nameplate, front, rear, connectors, and installed panel.
  • Hardware and firmware revision, supply rating, controller, network, and communication details.
  • Editable project files, runtime backups, software version, and the machine's acceptable downtime.
  • The preferred path: repair, exact-reference sourcing, or a reviewed migration.

What to do next

Preserve the project and nameplate evidence, then request inquiry-specific review for repair, exact-reference sourcing, or an engineered migration.

Review the project-backup guide before disturbing the installed unit.

Frequently asked questions

Is the Schneider Electric XBTGT5340 discontinued?

Schneider Electric identifies XBTGT5340 as an advanced touchscreen panel with a 640 × 480 VGA, 10.4-inch display and 24 V supply. Schneider's preserved exact-ID rendering records XBTGT5340 discontinued on December 31, 2015; an exact Schneider end-of-service date is not established in the collected record. Repair and migration require an exact-unit, project, and installation assessment; the cited records do not establish drop-in compatibility, stock, or guaranteed repair.

What should I verify before repairing or replacing XBTGT5340?

XBTGT5340: The Schneider-authored hardware guide groups XBTGT5340 with XBTGT5330 as TFT color LCD, 640 × 480 pixels, 65,536 colors, active display area 211.2 × 158.4 mm, with CFL backlight service life 50,000 hours at 25°C to half brightness. The Schneider-authored guide's shared XBTGT5330/XBTGT5340 table lists a 259 × 201 mm flush-mount cut-out and 1.6–10 mm panel thickness; this shared row does not establish exact-unit interchangeability. Verify the installed nameplate, revision, power, environment, controller, protocols, cables, project backup, and panel opening before selecting a route.

Is a named XBTGT5340 replacement guaranteed to be plug-and-play?

For XBTGT5340, capture the complete nameplate and hardware/firmware revision, then compare the schneider-authored xbtgt5340 product data lists 24 v dc rated supply, 19.2–28.8 v limits, and 30 w power consumption the xbtgt5340 product data lists usb type a, ethernet tcp/ip, com1 rs-232c/rs-422/rs-485, com2 rs-485, a compactflash slot, and an optional devicenet or profibus dp fieldbus card and the xbtgt5340 product data identifies vijeo designer configuration software, magelis operating system, 32 mb application flash, and 512 kb battery-backed sram; project and protocol support remain installation-specific against the installed project. Do not treat the evidence or any migration reference as interchangeability approval.

What solution paths are documented for XBTGT5340?

The researched paths are engineered migration assessment, xbtgt5340 engineered migration assessment, exact-unit repair assessment, xbtgt5340 exact-unit repair assessment. Current terms and suitability must be confirmed for the specific unit and machine context.

What if my identifier is slightly different from XBTGT5340?

Search the complete nameplate value or submit a request with a clear label photo so the revision can be researched without guessing.

Evidence and sources

Request researched help

Submit a matching request with the exact label, revision, machine context, and preferred solution path.

We do not make automated stock, price, turnaround, compatibility, provider-participation, or fulfillment claims. Every path requires inquiry-specific review.

Research desk method

NoLongerAvailable.net evaluates published evidence and secondary market signals to structure practical decision pathways. We do not hold stock or make automated fulfillment or engineering claims.